Show simple item record

dc.contributor.author Conolly, Carol L.
dc.contributor.author Zlotin, Alex
dc.date.accessioned 2006-08-09T17:48:51Z
dc.date.available 2006-08-09T17:48:51Z
dc.date.issued 2000-06
dc.identifier.citation Conolly, Carol L. and Zlotin, Alex, 2000, The Availibility of the Danville Coal Member for Mining in Indiana. Indiana Geological Survey Open-File Study 00-01, 47 p., 18 fig. en
dc.identifier.uri http://hdl.handle.net/2022/248
dc.description Indiana Geological Survey Open-File Study 2000-1 en
dc.description.abstract This study assesses the resources of the Danville Coal Member in Indiana and identifies those resources that have the most favorable geologic and land use characteristics for mining. The tonnage of original coal in place, remaining coal after mining, coal unlikely to be mined due to geologic and land use factors, and available coal resources were calculated for the Danville Coal in Indiana. The geologic and land use factors which restrict the mining of the Danville Coal were identified through interviews with geologists and mining engineers mining the Danville Coal in Indiana and Illinois. These restrictions were applied to the tonnage of remaining Danville Coal resources in order to calculate the tonnage of available resources. The original, remaining, and available coal resources are reported in terms of potential method of mining, "surface" or "underground," coal thickness, "14-28 inches," "28-42 inches," or "greater than 42 inches," and overburden thickness, "0-200 feet," and "greater than 100 feet." Coal that lies between depths of 100 and 200 feet is considered minable by both surface and underground methods. Additionally, the resources are categorized by three levels of geologic assurance or reliability. The reliability categories express the degree of reliability of the resource estimate based on the density of coal thickness data points that are used to derive the resource estimate. The three reliability categories are: measured (0-0.5 miles from the data point), indicated (0.5-2.0 miles), and inferred (2.0-4.0 miles). The total volume of original Danville Coal resources in Indiana is calculated to be 6.55 billion short tons. Of the 6.55 billion short tons, 0.36 billion short tons have been removed by mining or lost in the mining process, thus leaving 6.19 billion short tons of remaining Danville resources. Technological and land use restrictions remove 5.36 billion short tons from potential mining, leaving 0.83 billion short tons (13% of the original resources or 13% of the remaining resources) available for mining in Indiana. Of the 0.83 billion short tons of total available resources, 0.52 billion tons (8% of the original resources or 63% of the total available resources) are available for underground mining, while 0.31 billion short tons (5% of the original resources or 37% of the total available resources) are available for surface mining. en
dc.description.sponsorship Final Report to the United States Geological Survey Agreement No. 99HQAG0083 en
dc.format.extent 5087737 bytes
dc.format.mimetype application/pdf
dc.language.iso en_US en
dc.publisher Indiana Geological Survey en
dc.relation.ispartofseries Open-File Study en
dc.relation.ispartofseries 00-01 en
dc.rights This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.5 License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/2.5/ or send a letter to Creative Commons, 543 Howard Street, 5th Floor, San Francisco, California, 94105, USA. en
dc.subject Economic Geology en
dc.subject Coal en
dc.subject Energy Resources en
dc.subject Danville Coal Member en
dc.subject Dugger Formation en
dc.subject Carbondale Group en
dc.subject Indiana en
dc.title The Availibility of the Danville Coal Member for Mining in Indiana en
dc.type Technical Report en


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search IUScholarWorks


Advanced Search

Browse

My Account

Statistics